Speak to the experts on 03456 445 002
Master Industrial series UPS provide maximum protection and power quality for any type of load, especially industrial applications, such as manufacturing
and petrochemical processes, electrical distribution and power plants. Master Industrial is an on-line double conversion UPS (class VFI SS 111 in accordance with IEC EN 62040-3) with input and output isolation transformers.
Master Industrial is suited to the most demanding installation environments where there are vibrations, mechanical stresses, dust and in general where operating conditions are unfavourable to products created for the standard UPS market.
The high short-circuit current (ICC = 3) makes it suitable for loads that require high current peaks during switch-on or during normal operation.
The input and inverter transformers guarantee the isolation of the batteries, which are sized for a voltage of 220 Vdc (from 108 to 114 elements), the standard industrial value.
The input and inverter transformers guarantee the isolation of the batteries, which are sized for a voltage of 220 Vdc (from 108 to 114 elements), the standard industrial value.
Isolation transformer
Synchronisation device (UGS)
Hot connection device (PSJ)
Generator interface
Parallel configuration kit (Closed Loop)
Battery cabinets empty or for extended runtimes
Top Cable Entry cabinets
IP rating IP31/IP42
| Rated power |
|
|
|---|---|---|
| Voltage | 400 Vac three-phase | |
| Voltage tolerance | ± 20% | |
| Frequency |
|
|
| Frequency tolerance | 45/65 Hz | |
| Power factor | 0.93 | |
| Input current | 145 A | |
| Current distorsion | <3% in 12MP HC version | |
| Soft start | 0-100% in 120" configurable |
| Rated voltage | 400 Vac three-phase selectable 380 and 415 | |
|---|---|---|
| Voltage tolerance |
|
|
| Rated frequency |
|
|
| Frequency tolerance | Frequency tolerance | |
| Rated current | 145 A | |
| Number phases | 3 | |
| Back-feed protection | yes | |
| Overload capacity Inx10ms | 14 |
| Rated power | 30000 VA | |
|---|---|---|
| Active power | 24000 W | |
| Number phases | 3 + N | |
| Crest factor (Ipeak/Irms) | 3 : 1 | |
| Waveform |
|
|
| Static stability | ± 1% | |
| Dynamic stability | ± 5% in 5 ms | |
| Frequency | same as the input (autorange) | |
| Voltage distortion with distorcing load | <3% | |
| Voltage distortion with linear load | 1% (rated) 2% (max) | |
| Frequency stability | ± 0,05% on mains failure ± 2% (selectable from ± 1% to ± 5% from front panel) with mains supply present | |
| Inverter efficiency at rated load | 95% % | |
| Overload | 125% 150% 200% of the rated current for 10^ / 1^ / 7§ |
| Ripple | <1% |
|---|
| Type | Maintenance-free sealed lead-acid | |
|---|---|---|
| Maximum recharge current |
|
| Altitude max |
|
|
|---|---|---|
| Color | Light grey RAL 7035 | |
| Remote controls | EPO and bypass | |
| Safety compliance | EN 62040-1:2008; EN 62040-1/EC:2009; EN 62040-1/A1:2013 and Directive 2014/35/EU | |
| EMC conformance | EN 62040-2 and Directive 2014/30/EU | |
| Protection rating | 3 | |
| Cooling (type) | redundant fans | |
| AC/AC efficiency | 92,5% | |
| Noise (at 1 m) | 63 dBA at 1 m | |
| Remote signals | voltage free contacts (mains power failure, UPS on bypass, end of discharge pre-alarm, output 12Vdc 80mA) | |
| Operating temperature |
|
|
| Relative humidity | 95% no condensing |
| Weight | 850 kg |
|---|---|
| Dimensions (h w d) | 1900x800x800 mm |
Call us on 03456 445 002
Email us on [email protected]